Adafruit 3.5 inch TFT LCD Display Breakout PCB

Click here to purchase one from the Adafruit shop

Click here to purchase one from the Adafruit shop

Adafruit 3.5" 18-bit color TFT LCD display with microSD card breakout

This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT.

There are two version of this display: one has a resistive touchscreen attached to it and the other has a capacitive touchscreen attached.

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) or you can purchase and use our resistive touchscreen controller (not included) to use I2C or SPI.

These are the Eagle CAD files for the Adafruit 3.5" 18-bit color TFT LCD display with microSD card breakout: ----> https://www.adafruit.com/products/2050

and the Adafruit 3.5" TFT 320x480 with Capacitive Touch Breakout Board - EYESPI ----> https://www.adafruit.com/products/5846

License

Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!

All text above must be included in any redistribution

Designed by Limor Fried/Ladyada for Adafruit Industries. Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution. See license.txt for additional information.