Artix DC-SCM

Copyright (c) 2020-2025 Antmicro

Overview

This repository contains design files for an open-source Baseboard Management Controller (BMC) module based on the Xilinx Artix-7 FPGA family, designed in accordance with the Data Center Secure Control Module (DC-SCM) specification of Open Compute Project (OCP).

The design files were prepared in KiCad 9.x.

Repository structure

The main repository directory contains KiCad PCB project files, a LICENSE and README. The remaining files are stored in the following directories:

• img - contains graphics for this README

Key Features

• Artix-7 FPGA - XC7A100T-FGG484
• DC-SCI standard 168-pin 4C+ edge connector
• On-board DDR3 DRAM (AS4C256M16D3) and eMMC (MTFC16GAPALNA-AIT)
• 4x SPI FLASH memory
• Gigabit Ethernet over KSZ9031RNXCA PHY
• JTAG connector
• Host and client USB (over USB3300-EZK-TR PHY)
• M.2 NVMe interface
• 13x I2C buses, 4x I3C buses
• 2x UART
• SPI connector
• RoT module connector
• TPM SPI connector

Block diagram

License

This project is published under the Apache-2.0 license.