Loading 3D model… large boards can take a moment.
Antmicro's Google Coral Baseboard
Copyright (c) 2019-2023 Antmicro
Overview
This project contains open hardware design files for a baseboard supporting the Google Coral SoM with NXP i.MX8X and Google's Edge TPU ML inference ASIC (also available as part of the Coral Edge TPU Development Board, created by Antmicro. The board provides standard I/O interfaces and allows the user to interface with two MIPI CSI-2 compatible video devices over a unified Flexible Flat Cable (FFC) connector.
Key features
- Interface connectors for the Coral Edge TPU module
- Gigabit Ethernet RJ45 connector
- Micro USB serial debug connector
- Micro SD card interface
- 50-pin FFC connectors exposing MIPI CSI-2 camera interfaces
- USB-C DFP (Host) port
- Mini HDMI video output interface
- Integrated DC/DC power supply accepting 6-36VDC of input voltage
The PCB project files were prepared in Altium Designer 14.1.
Project structure
The main directory contains Altium project file, documentation script a LICENSE and README. The remaining files are stored in the following directories:
Libraries- contains the component librariesimg- contains graphics for this READMEPCB- contains schematics and layout filesDocumentation- contains PDF schematic and generated assembly assets
Getting started
The board can be produced and assembled using the provided design files. Please take a look at the mechanical layers for more information regarding the PCB stackup recommended for fabrication. The board accepts power supply voltage in the 6-36VDC range. It is recommended to use a 12V 2A DC supply to power the board. The board has an integrated power sequencer that starts the module automatically right after applying the power supply. Please refer to the Coral documentation for more details regarding the .
Ask about this board
No comments yet. Be the first to ask about this board.