Loading 3D model… large boards can take a moment.
CopyRight 2023 ApotheoTech
The Aper-Oculus (PN: APT-KRIA-FMC) is an open-source carrier board for Xilinx's Kria SOM, targeting high-speed camera design. The board has a large amount of I/O including an modified HPC pinout FMC connector, MIPI, and an FRAMOS PixelMate compatible SLVS-EC connector. ApotheoTech will provide an MVP encrypted IP for the SLVS-EC protocol so users can focus on their imaging algorithms in FPGA fabric! There is even a barometer and 3 axis accelerometer on board for the possibility of drone design!
The Aper-Oculus will be released with example designs using the SLVS-EC encrypted IP core, and a system test to quickly verify working I/O. ApotheoTech will be testing the FMC with CoaXPress and SMPTE SDI FMC cards FMC cards, and will include example designs for associated boards.
FRAMOS SLVS-EC FSM to PS side DisplayPort
ApotheoTech's CoaXPress FMC board to Basler Boost. Streaming video via PS side Displayport @3840x2160, 30fps (PS-DP is bottleneck). (Working on ZCU104, will port to Aper-Oculus when boards arrive)
ApotheoTech's CoaXPress FMC board in loopback mode from TX to RX (Working on ZCU104, will port to Aper-Oculus when boards arrive)
Launched! On CrowdSupply
Fixed some small resistor part numbers, mostly been working on FPGA design side of things. Restructuring repository for easier movement.
I've been waiting for 4 months for 1 part! Now that it has arrived production can commence, which will take about a month. Testing and space for respin is reserved for February. March is tentative launch date.
For board updates: fixed massive issue with Raspberry Pi connectors not being correct, also made SLVS-EC lanes length matched and shorter to ensure better signal integrity. Remember to take extreme caution for CMOS chips that support SLVS-EC and SLVS! The output lane number might change based on the mode you're selecting!
The board's size was increased by 10mm to simplify layout and add a USB A 3.0 connector to the board. The layer count was also increased from 14 to 16 to accommodate necessary power for the board. Changed power control device from IGLOO Nano to PIC for ability to follow IPMI FMC standard, by reading IPMI EEPROM on FMC and setting VADJ to correct voltage before releasing board reset, and establishing CC_PL_GOOD.
The files are released under GPLV3 License..
No comments yet. Be the first to ask about this board.