BrowseBoardRepo

Kebu

Public

@cedutus

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 72 files, ready to open in KiCad33 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip951 KBGerbers and drill zip: Kebu_Bottom_4row28 KBGerbers and drill zip: Kebu_Bottom_5row33 KBGerbers and drill zip: Kebu_Cover_4row27 KBGerbers and drill zip: Kebu_Cover_5row23 KBGerbers and drill zip: Kebu_Plate_4row169 KBGerbers and drill zip: Kebu_Plate_5row196 KBPick and place (CSV)8.4 KBPick and place (CSV): Kebu_Bottom_4row209 BPick and place (CSV): Kebu_Bottom_5row211 BPick and place (CSV): Kebu_Cover_4row167 BPick and place (CSV): Kebu_Cover_5row167 BPick and place (CSV): Kebu_Plate_4row3.8 KBPick and place (CSV): Kebu_Plate_5row4.7 KBBOM CSV5.3 KB
Schematic PDFEvery sheet, to read or print193 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)15 MB3D model (GLB): Kebu_Bottom_4row69 KB3D model (GLB): Kebu_Bottom_5row69 KB3D model (GLB): Kebu_Cover_4row46 KB3D model (GLB): Kebu_Cover_5row47 KB3D model (GLB): Kebu_Plate_4row443 KB3D model (GLB): Kebu_Plate_5row538 KB
Browse all files

Share Kebu

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/cedutus/kebu

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

Kebu

A Ortholinear keyboard that supports multiple layouts, including 4row and 5row options.

Parts

  • 47-61x Hotswap sockets (MX or Choc)
  • 47-61x SMD Diodes depending on layout chosen.
  • 1x Blackpill controller (F401 or F411)
  • 6x 5mm or shorter M2 screws
  • 2x 12mm M2 spacer
  • 4x 10mm M2 spacer
  • Rotary encoder & cap
  • Optional: 2u Stabilizer

Build guide

  • First choose a layout
  • Solder diodes on the PCB
  • Solder hotswap sockets on the PCB
  • Solder Blackpills with the buttons facing up. B12 to Square pad
  • Optional: Solder rotary encoders
  • Optional: Install stabilizer

Firmware is not included in QMK repo, you will have to compile it yourself. Most of the code is copied and stripped down from Vattern's Grandiceps keyboard. Blackpill bootloader: hold down the boot button on the blackpill, then press NRST. it might take some tries.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.