BrowseBoardRepo

Lihis

Public

@cedutus

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 38 files, ready to open in KiCad2.8 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip120 KBGerbers and drill zip: Lihis439 KBGerbers and drill zip: Lihis_Bottom18 KBGerbers and drill zip: Lihis_Cover18 KBGerbers and drill zip: Lihis_Plate30 KBGerbers and drill zip: Lihis_Plate_No_Rotary29 KBPick and place (CSV)3.8 KBPick and place (CSV): Lihis3.7 KBPick and place (CSV): Lihis_Bottom35 BPick and place (CSV): Lihis_Cover35 BPick and place (CSV): Lihis_Plate1.6 KBPick and place (CSV): Lihis_Plate_No_Rotary1.5 KBPCB BOM CSV (PCB SVG)2.6 KBPCB BOM CSV (PCB SVG: Lihis)2.6 KBPCB BOM CSV (PCB SVG: Lihis_Bottom)50 BPCB BOM CSV (PCB SVG: Lihis_Cover)50 BPCB BOM CSV (PCB SVG: Lihis_Plate)850 BPCB BOM CSV (PCB SVG: Lihis_Plate_No_Rotary)818 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)7.6 MB3D model (GLB): Lihis15 MB3D model (GLB): Lihis_Bottom127 KB3D model (GLB): Lihis_Cover60 KB3D model (GLB): Lihis_Plate312 KB3D model (GLB): Lihis_Plate_No_Rotary303 KB
Browse all files

Share Lihis

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/cedutus/lihis

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

Lihis

Lihis is a keyboard made by Eetu for Eetu. It's basically a worse Helix using a Blackpill.

Parts

  • 48x Hotswap sockets (MX or Choc or both)
  • 48x Diodes (Through hole or SMD)
  • 1x 10k resistor (Trough hole)
  • 2x Blackpill controller (F401 or F411)
  • 2x Headphone jack
  • 12x 5mm or shorter M2 screws
  • 4x 12mm M2 spacer
  • 8x 10mm M2 spacer
  • 2x Rotary encoder with caps (optional)

Build guide

  • Solder diodes on the PCB
  • Solder hotswap sockets on the PCB
  • Solder 10k resistor into one of the PCB's
  • Solder the headphone jack on the topside depending on your half
  • Solder Blackpills with the buttons facing up. B12 to Square pad
  • Optional: Solder rotary encoders

Firmware is not included in QMK repo, you will have to compile it yourself. Most of the code is copied and stripped down from Vattern's Grandiceps keyboard. Blackpill bootloader: hold down the boot button on the blackpill, then press NRST. it might take some tries.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.