Loading 3D model… large boards can take a moment.
The Edgeberry Base Board provides essential additional functionality for deploying the Raspberry Pi Model B as an IoT edge device in a real-world environment.
For using your Edgeberry hardware with the Edgeberry ecosystem (e.g. the Edgeberry Dashboard), you'll need to install the Edgeberry Device Software. Follow these installation steps. If you have different plans with this board, this software is not required for correct operation of any of its hardware components.
[!important] When you purchased the Edgeberry Hardware, the manufacturer has written the EEPROM. If you are the manufacturer, or you're hacking your Edgeberry board, then continue with the following steps.
write protection jumper (JP1) on the Edgeberry Hardware to enable writing the EEPROMeepmake $ ./eepmake eeprom_settings.txt edgeberry.eepeepflash.sh $ sudo ./eepflash -w -t=24c256 -f=edgeberry.eepreboot the device and check the device tree for your hat's settings $ cat /proc/device-tree/hat/vendor)Copyright© 2024 Sanne 'SpuQ' Santens. This project is released under the CERN OHL-W license. The Rules & Guidelines apply to the usage of the Edgeberry™ brand.
If you'd like to contribute to this project, please follow these guidelines:
main.
No comments yet. Be the first to ask about this board.