BrowseBoardRepo

AgonLight2-Proto

Public

@olimex

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 22 files, ready to open in KiCad2.1 MBSchematic PDFEvery sheet, to read or print175 KB3D modelThe board with its parts, for an enclosure (GLB)15 MB
Browse all files

Share AgonLight2-Proto

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/olimex/agonlight2-proto

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

AgonLight2-Proto

AgonLight2-Proto is small board with dimensions 100x80mm. It allows you to fast prototype concept and ideas for AgonLight2 computer.

Features

AgonLight2-Proto has these features:

  • IDC connector 34 pin for connection on AgonLight2 GPIO
  • 3mm RED LED for 5V power indication
  • 3mm GREEN LED for 3.3V power indication
  • Sea-of-Pads
  • GND and 3.3V bus connecting vertically all pads on the left edge
  • GND and 5V bus connecting vertically all pads on the right edge
  • Dimensions 100x80mm
  • 3 hex distance spacers for keeping board horizontally when ICD connector is plug to AgonLight2 GPIO

Licenses

  • Hardware is released under CERN Open Hardware Licence Version 2 - Strongly Reciprocal, all silkscreen credits to Olimex should remain;
  • Software is released under GPL3 Licensee
  • Documentation is released under CC BY-SA 3.0
Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.