Loading 3D model… large boards can take a moment.
The CM5 MINIMA REV2 is a compact carrier board for the latest Raspberry Pi computing module 5. It is designed for embedded applications, DIY electronics, and low-power computing projects. Unlike traditional desktop computers, the CM5 is a small, efficient system that integrates essential computing hardware onto a single board. Whether you're a hobbyist, developer, or engineer, this module provides a versatile platform for various applications, including IoT, automation, and custom hardware development.
If you're not familiar with Raspberry Pi or single-board computers (SBCs), think of the CM5 as a miniaturized computer that can handle tasks like data processing, networking, and hardware control, all while fitting in the palm of your hand. https://www.raspberrypi.com/products/compute-module-5/?variant=cm5-104032
Get to know the story behind the MINIMA on Hackster.io:
https://www.hackster.io/piecol/tiny-open-source-media-streamer-with-lorawan-what-a98a93
MINIMA was developed using KiCad, a powerful open-source Electronic Design Automation (EDA) tool. KiCad enables designers to create high-quality PCB layouts and schematics while maintaining full control over their hardware designs. By leveraging open-source tools like KiCad, the CM5 MINIMA REV2 embraces accessibility, collaboration, and innovation in hardware development. It is also certified by the Open Source Hardware Association: https://certification.oshwa.org/it000020.html
To use the CM5 MINIMA REV2, you'll need:
To flash an operating system (OS) to the CM5, use the switch located on the bottom of the board to enable flashing mode. It is equivalent to the "Fit nRPI_BOOT to J2 (disable eMMC Boot) on the IO board jumper." on the CM5 IO board. Please refere to the official guidelines for further instructions: https://www.raspberrypi.com/documentation/computers/compute-module.html#set-up-the-io-board
The CM5 MINIMA REV2 is a powerful and flexible computing module that opens up endless possibilities for embedded computing and automation. Whether you're building a smart device, experimenting with sensors, or designing a networked system, this board provides the essential features you need in a compact, energy-efficient form factor.
6L (SIG:PWR | GND | SIG-PWR | PWR | GND | SIG:PWR)
No comments yet. Be the first to ask about this board.