Loading 3D model… large boards can take a moment.
CYBR-X is a custom macropad that has:
The switches go into the plate, the plate and bottom sandwich the PCB then, and thats how assembly is done.
Here's the BOM for my macropad:
| Name | Quantity |
|---|---|
| Seeed Studio XIAO RP2040 | 1 |
| MCP23017 I2C I/O Expander | 1 |
| BSS138 MOSFET | 1 |
| 1N4148 Diode (Through-hole) | 16 |
| MX-Style Switch | 16 |
| Kailh MX-Style Hotswap Socket | 16 |
| Blank DSA Keycap (White) |
| 16 |
| EC11 With Switch | 2 |
| SK6812 MINI-E RGB LED | 16 |
| 0.1uF 0805 Ceramic Capacitor | 16 |
| 10kΩ 0805 Resistor | 4 |
| 0.91" OLED I2C Display | 1 |
| M3x16mm Screw | - |
| M3x5mx4mm Heatset Insert | - |
| 3D Printed Case (2 Parts) | 1 |
| Main PCB | MOQ: 5 |
For the screws and inserts, as many as there are in kit is fine but minimum is 4.
No comments yet. Be the first to ask about this board.