BrowseBoardRepo

airmq-sensor

Public

@airmq

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 12 files, ready to open in KiCad1.2 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip492 KBGerbers and drill zip: AirMQ - 2.0.2538 KBGerbers and drill zip: AirMQ - ESP8266-0.4.9491 KBGerbers and drill zip: Sensor_stick47 KBPick and place (CSV)6.2 KBPick and place (CSV): AirMQ - 2.0.24.2 KBPick and place (CSV): AirMQ - ESP8266-0.4.96.2 KBPick and place (CSV): Sensor_stick1.1 KBBOM CSV17 KB
Schematic PDFEvery sheet, to read or print85 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)13 MB3D model (GLB): AirMQ - 2.0.28.9 MB3D model (GLB): AirMQ - ESP8266-0.4.913 MB3D model (GLB): Sensor_stick1.1 MB
Browse all files

Share airmq-sensor

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/airmq/airmq-sensor

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

AirMQ-sensor

Root repository for AirMQ hardware project

AirMQ toolkit consists of main MCU and several sensor boards designed with common form factor in mind. Currently, particulate matter, radiation and electrochemical sensor boards are available.

MCU board includes advanced power circuitry which makes possible the use of reduced consumption modes while powering from batteries or solar panels. All ESP8266’s gpio pins are accessible with a separate 16-pin connector sharing pin numbering with most popular development boards.

All boards share the same type of extension connector which allows for stackability limited by sensors size.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.