Imported from GitHub: ajhewitt/novasaur · commit eda75f0 · license GPL-3.0

Description

Retrocomputer built from late-70's TTL logic chips

README

CNC Routing Files

The following GRBL files are used to cut the rear and engrave the front panels of the Polycase ZN-40 case. The files were developed on a Genmitsu 3020-PRO MAX CNC router machine. Align to bottom left corner of work piece.

• 3020-spoilboard.nc - 3/4" thick MDF spoilboard for the 3020-Pro Max cut with 1/8" end mill
• slot.nc - slot for holding ZN-40 panel cut with 1" surfacing bit (align to center left screw)
• novasaur-front.nc - Novasaur ZN-40 front panel engraving cut with 30-degree V-bit
• novasaur-back.nc - Novasaur ZN-40 back panel holes cut with 1/8" end mill
• novatron-front.nc - Novatron ZN-40 front panel engraving cut with 30-degree V-bit
• novatron-back.nc - Novatron ZN-40 back panel holes cut with 1/8" end mill