Loading…
Copyright (c) 2020 Antmicro <https://www.antmicro.com>_
.. image:: https://img.shields.io/badge/View%20on-Antmicro%20Open%20Source%20Portal-332d37?style=flat-square :target: https://opensource.antmicro.com/projects/gem1-adapter
.. figure:: img/zglue-gem1-adapter.jpg
This repository contains PCB design files for an adapter board accommodating the GEM1 chip created jointly by zGlue <http://zglue.com>_ and Antmicro <http://www.antmicro.com>.
The GEM1 design <https://zglue.com/design-automation/oci/project/gem1> utilizes the zGlue ZiP chiplet technology and has been prepared using zGlue's ChipBuilder <http://chipbuilder.zglue.com/>_ tool.
The design has been produced as a single integrated circuit in the LGA-96 package.
The GEM1 chip contains the following components located on a dynamically reconfigurable interposer:
ICE40UP5K-UWG30ITR FPGAs used for processing and system controlPower is supplied to the chip from a single VUSB voltage of 5 VDC.
The actual configuration of the system running inside the GEM1 zip depends on the configuration routing file that is uploaded to the Smart fabric interposer.
Also, pin functions of the LGA package may vary depending on the uploaded routing file.
The board break-routes signals for the MIPI CSI-2 interfaces (Input and Output), along with the internal flash and FPGA configuration interfaces, control signals and power supplies.
Loading files…
No comments yet. Be the first to ask about this board.