AnyLeaf ELRS 2.4Ghz diversity Rx hardware

This repo contains published hardware information for the AnyLeaf ELRS receivers. It contains schematics, KiCad schematic and PCB layout files, and production files (Gerbers, drill files, bill of materials (BOM), and pick+place files). If you have any questions or concerns, please post a Github issue here, or contact us at [email protected].

This repo contains 2 designs:

• Single radio (SX1280), with ESP8285 MCU, and SkyWorks SE2431 LNA/PA/antenna mux.
• Dual radio (SX1280), with ESP32-PICO-V3 MCU, and SkyWorks RFX2401C LNA/PAs.

Images of the schematics are provided as PNG files in the main repo; this is the easiest way to view the schematics.

To view details, including PCB layouts, open the schematic and/or PCB files in KiCad.

For info on specific parts chosen, including part numbers at Digikey and LCSC, open the schematic files in KiCad, and examine part properties.

All parts are on the same side of the PCB. Resistors and capacitors are 0402 size.

ExpressLRS home page

ExpressLRS hardware repo

AnyLeaf single-radio 2.4Ghz receiver

AnyLeaf dual-radio 2.4Ghz receiver