Loading 3D model… large boards can take a moment.
A custom ESP32-based controller for WS2812B/SK6812/WS2814 LED strips with web interface and Alexa integration.
Latest Version: V2 includes 24V RGBW support (WS2814), temperature/humidity monitoring, and enhanced status LEDs.
✅ Released - Latest version in main branch
✅ Released - Tagged as v1.0.0
The following documentation applies to Version 2 of the project. All files are located in the v2/ directory.
v2/
├── code/ # Arduino code & web interface
│ └── esp32-ws2814/ # WS2814 (RGBW) version
│ ├── data/ # Web interface files
│ │ ├── index.html # Main web UI
│ │ ├── style.css # Styling
│ │ └── app.js # JavaScript controls
│ └── esp32-ws2814.ino # Arduino sketch
├── kicad/ # KiCad PCB project files
└── assets/ # Board photos & schematics
Add ESP32 Board Support:
File → Preferences → Additional Board Manager URLs:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
Board Configuration:
Install Libraries via Library Manager
Configure Settings in the .ino file:
const char* ssid = "Your_WiFi_Network";
const char* password = "Your_WiFi_Password";
#define DEVICE_NAME "Your_Alexa_Device_Name"
#define WIFI_HOSTNAME "Your_Device_Hostname"
#define WEB_SERVER_PORT 8080 // Your preferred port
#define NUM_LEDS 60 // Your LED count
Upload Web Files:
data folder in your sketch directoryUpload Arduino Sketch normally
The v2 board uses an ESP32-S3 with built-in USB - no need for an external USB-to-serial adapter.
USB Connection:
Arduino IDE USB Configuration:
To get USB UART working on the Serial Monitor:
Board Settings (Tools menu):
ESP32S3 Dev ModuleEnabled ⚠️ Important for Serial MonitorHardware CDC and JTAGUART0 / Hardware CDC8MB8M with spiffs (3MB APP/1.5MB SPIFFS)921600 (or lower if uploads fail)Port Selection:
/dev/cu.usbmodem*COM*/dev/ttyACM*USB CDC On Boot Explained:
Enabled, the Serial Monitor will work over USB immediately after bootSerial.println() without additional hardwareFirst-Time Programming:
BOOT button (if available on your board)BOOT button when upload starts115200 baud to see outputTroubleshooting:
460800 or 115200115200 and USB CDC On Boot is enabled| ESP32 Pin | Connection |
|---|---|
| GPIO 40 | WS2814 LED Strip Data |
| GPIO 41 | Status LEDs (3x SK6805-EC20) |
| GPIO 1 | I2C SCL (AHT20 Sensor) |
| GPIO 2 | I2C SDA (AHT20 Sensor) |
| GPIO 4-7 | Control Buttons |
After successful upload:
http://[ESP32_IP]:[WEB_SERVER_PORT]The board features 3 RGB status LEDs:
Custom PCB design includes:
The following documentation applies to Version 1 of the project. All files are located in the v1/ directory.
v1/
├── code/ # Arduino code & web interface
│ ├── esp32-ws2812b/ # WS2812B (RGB) version
│ │ ├── data/ # Web interface files
│ │ │ ├── index.html # Main web UI
│ │ │ ├── style.css # Styling
│ │ │ └── app.js # JavaScript controls
│ │ └── esp32-ws2812b.ino # Arduino sketch
│ └── esp32-sk6812/ # SK6812 (RGBW) version
│ ├── data/ # Web interface files
│ └── esp32-sk6812.ino # Arduino sketch
├── kicad/ # KiCad PCB project files
├── gerbers/ # Manufacturing files
├── datasheets/ # Component datasheets
├── ibom/ # Interactive BOM
└── assets/ # Board photos
Add ESP32 Board Support:
File → Preferences → Additional Board Manager URLs:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
Board Configuration:
Install Libraries via Library Manager
Choose Your LED Type:
v1/code/esp32-ws2812b/ for standard RGB stripsv1/code/esp32-sk6812/ for RGBW strips with dedicated white channelConfigure Settings in the .ino file:
const char* ssid = "Your_WiFi_Network";
const char* password = "Your_WiFi_Password";
#define DEVICE_NAME "Bedroom Lights"
#define NUM_LEDS 60 // Your LED count
Upload Web Files:
data folder in your sketch directoryUpload Arduino Sketch normally
| ESP32 Pin | Connection |
|---|---|
| GPIO 2 | LED Strip Data |
| GPIO 17 | Status LED (Red) |
| GPIO 16 | Status LED (Green) |
| GPIO 18 | Status LED (Blue) |
| GPIO 4-7 | Control Buttons |
After successful upload:
http://[ESP32_IP]:8080Read the full build story and PCB design process for V1: ESP32 LED Controller
Custom PCB design includes:
The web interface uses vanilla JavaScript with no external dependencies. All files are served from ESP32's LittleFS for fast loading and offline operation.
This project is licensed under the MIT License - see the LICENSE file for details.
No comments yet. Be the first to ask about this board.