BrowseBoardRepo

brick-rover-brainboard

Public

@barafael

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 18 files, ready to open in KiCad63 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip175 KBGerbers and drill zip: joystick-board207 KBPick and place (CSV)1.8 KBPick and place (CSV): joystick-board424 BPCB BOM CSV (PCB SVG)1.6 KBPCB BOM CSV (PCB SVG: joystick-board)366 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)4.1 MB3D model (GLB): joystick-board1.9 MB
Browse all files

Share brick-rover-brainboard

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/barafael/brick-rover-brainboard

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

brick-rover-brainboard

A PCB module with stm32f411 "Black Pill" and hc-12 that can serve as basic hobby RC-like sender or receiver.

Notes for next revision: Swap analog+pwm headers so that antenna and pwm are on one side, analog on the other. This will make the wires on the sender shorter neater. The rounded edges of the brainboard could face forward. On the analog input board, make the analog outputs a triple-row so that servo male-male can be used to connect signal ground and power. Slightly decrease lego hole size.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.