Loading 3D model… large boards can take a moment.
Persuasive Waker is an open source hardware alarm clock that can't be snoozed or turned off. The alarm is deactivated via a remote key fob, which should be placed as far from the user's bed as possible. E.g. in the bathroom.
The KiCad design files are located in the hw folder.
The STEP assembly is located here.
If you just want STLs for printing, they're here.
| Item | QTY | Source |
|---|---|---|
| Case | 1 | 3D Print |
| Screen Holder | 1 | 3D Print |
| Spacer | 2 | 3D Print |
| M2.5x0.45-12-SHCS-SS304 | 4 | |
| M2.5x0.45-6-SHCS-SS304 | 4 | |
| M2.5x0.45-4-FHS-SS304 | 2 | |
| PRESSNUT-M2.5x0.45-SS304 | 2 | Mouser |
| Battery Holder | 1 | Mouser |
| THRIN-M2.5X0.45-HS-PL-4L3.5D-BR | 8 | Amazon |
| E-Paper Display | 1 | AliExpress |
| Key Fob | 1 | AliExpress |
| Alarm PCB | 1 | Custom PCBA Order |
| Front Plate | 1 | Custom PCB Order |
| Rear Plate | 1 | Custom PCB Order |
Install CircuitPython on your Pico by following this guide. The last version tested with this device is 9.2.6.
Install circup on your computer.
Run the following commands to install all necessary libraries.
circup bundle-add adafruit/circuitpython-fonts
circup install adafruit_sht4x adafruit_ssd1680 adafruit_display_text adafruit_ds3231 adafruit_datetime adafruit_display_shapes font_ostrich_sans_black_24 font_ostrich_sans_black_60
Delete code.py from the Pico's storage.
Clone this repo onto your computer and copy+paste everything in the src folder to the Pico's storage.
The alarm clock should be functioning now.
See here.
Replace the old src files with the new ones on the v3.1 branch.
Install circup and run the following.
circup bundle-add adafruit/circuitpython-fonts
circup uninstall font_ostrich_sans_black_30 font_ostrich_sans_black_72
circup install font_ostrich_sans_black_24 font_ostrich_sans_black_60
circup update
Alternatively, you can download the requirements.txt and run the following:
circup install -r /path/to/requirements.txt
No comments yet. Be the first to ask about this board.