Hardware projects tagged pcb
Open hardware projects tagged pcb on BoardRepo, the GitHub for hardware. View schematics and PCBs in the browser and download the sources.
Projects
Leet AI – Wireless Synthesizer Ensemble with AI-powered composition for endless inspiration
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
Motor controller based on DRV8874
Motor driver PCB
Tiny LiPo Charger & I2C Battery Meter (w/ MAX17048)
No description.
Brushless DC motor driver
This repo contains open-source KiCad PCB designs for a DIY AM/FM radio receiver using the Sony CXA1019S IC. Perfect for electronics beginners! 🔹 Key Features: Dual-band (AM+FM) receiver schematic Optimized PCB layout for low noise Ready-to-manufacture Gerber files
Arduino based data logger with LoRa IoT interface.
Datalogger board design with KiCad The design files are available and free to use. For Any project related question do not hesitate to message me.
Hardware PCB Design for AVR-based Datalogger using KiCAD
Hardware design and schematic for weather station sensor.
Peugoet Infotainment Project PCB
The SolarMeshtasticNodeMini (ESP32-C3 + Semtech SX1262 + TI BQ25185 Solar Charger) is a minimalistic Meshcore/Meshtastic compatible device.
Three-Phase Energy Monitor (3P4W) with RJ45 Ethernet communication, powered via PoE and based on the ESP32-S3. Designed for the real-time acquisition and visualization of electrical parameters in 4-wire systems within Office Blocks.
BaseBoard design for QMTech Kintex 7 FPGA
ESP32 Dev Boards PCB
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
Small embedded dev board with an STM32H7 and a full J-link connector
RP2040-based flight computer for rockets
Ortholinear split keyboard for Framework 16
Generated keyboard
A 42-key, low profile, monoblock mechanical keyboard
Leopold FC980C replacement keyboard controller
Driverino-Shield is an Arduino based simple, low power controller for PM BLDC sensored motors.
NoahFC - Atmega328 based Flight Controller
60/52 keys Kailh Choc V1 low profile switches ortho keyboard
Tiny PicoProbe PCB
Split Ergo Mechanical Keyboard
A soldering reflow hot plate based on STM32
@tzarc's custom keyboard designs.
A prototype board with connectors for electronic testing and development.
34 key choc hotswap keyboard, wireless
40% Mechanical TH Keyboard
Domestic vibration sensor with ESP32: detects and monitors motion and vibrations in real-time using a 6-axis MPU-6050 IMU. Battery-powered and Wi-Fi/Bluetooth enabled, ideal for smart home, IoT, and predictive maintenance applications.
Star-Topology Connector Board for CAN-Bus with Debugging Port
A 6S AM32-compatible ESC built as a proof of concept for learning how to design an ESC from scratch
Tokay AI Camera - ESP32 camera development board
Strain Gauges analog front end and ADC
A column-staggered wireless spilt keyboard with scrollwheels, thumb- and pinky cluster.
A Custom STM32 board that runs on a battery with MCP73831 and is easily programmable with USB thanks to the CP2102 USB-to-UART chip.
Small low-power photovoltaic MPPT module with LTO battery
QFH active antenna analog front end and down converter
PCB board for Smogly sensor [ESP8266/ESP32]
A nRFMicro/Pro Micro compatible Bluetooth LE board, uses MDBT50Q nRF52840/nRF52833 module
Small and compact 20-keys keyboard
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
RP2040-based USB DMX dongle with integrated web server
PMW3610 laser mouse sensor breakout board, support either 1.8V or 3.3V logic
Pro Micro/Elite-Pi compatible RP2040 board with USB-C, 8MB flash and up to 25 GPIOs
A 2-layer PCB for a small sumobot including MSP430G2553, regulators, motor drivers, and IR receiver.
PMW3360 optical mouse sensor breakout board, support both 3.3V and 1.8V logic
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
All the sources (Schematics, PCB, VHDL, BIOS sources) for the M8SBC-486. This project is a 486 Homebrew computer, with some efforts to make it kinda PC compatible
a wireless-only split keyboard based on the chocofi
An open source breakout board for PixArt PAW3395DM-T6QU / PAW3950DM-T5QU low power optical mouse sensor.
A DC-DC buck converter based on an STM32 Nucleo board