Loading 3D model… large boards can take a moment.
RS-485LP is an open-source RS485 converter featuring a custom PCB and optimized PlatformIO firmware. It is designed to minimize power consumption for battery-operated sensors and remote monitoring systems.
🔗 Official Project Website: https://belenseptian.github.io/RS485LP/
Below are the top and bottom views of the RS-485LP PCB.
| Top View (Components) | Bottom View (Traces) |
|---|---|
The PCB design is created using KiCad. You can find the project files in the pcb/ directory.
Most modern PCB manufacturers allow you to upload the KiCad file directly:
.kicad_pcbpcb/.zip file to the manufacturer.This project uses PlatformIO inside Visual Studio Code.
git clone https://github.com/belenseptian/RS485LP.git
firmware/ folder and select it.115200).| Pin Name | Description | Connection |
|---|---|---|
| VCC | Power Input | Depend on the sensor specifications |
| GND | Ground | Ground |
| A | RS485 Data+ | Connect to Bus A |
| B | RS485 Data- | Connect to Bus B |
RS-485LP/
├── firmware/ # PlatformIO project files
│ ├── src/ # Main application code (Sleep/Shutdown logic)
│ └── platformio.ini # Project configuration
├── pcb/ # KiCad project files (.kicad_pcb, .kicad_sch)
├── docs/ # Datasheets and additional documentation
└── README.md # This file
This project is licensed under the GNU General Public License v3.0 - see the LICENSE file for details.
Contributions are welcome! If you have suggestions for better power-gating or further reducing shutdown current, feel free to open an Issue or submit a Pull Request.
Developed by Belen Septian
Updated
No comments yet. Be the first to ask about this board.