Loading 3D model… large boards can take a moment.
This project transforms your regular projector into a smart home device, enabling voice control and automation through Apple's HomeKit ecosystem.
An ESP32-based device that can control projectors via infrared signals and integrates with Apple HomeKit. It allows you to control your projector using Siri voice commands, the Home app, or enable your projector to be added to scenes like "Movie time" or "Bed Time".
Breadboard prototype showing initial testing setup
3D rendering of the PCB design
Empty from top view (left), empty from bottom view (middle), partly assembled with external IR LED for testing (right)
3D rendering of the case design
smart-projector-remote/
├── board/ # PCB design files
│ ├── bom/ # Bill of Materials
│ ├── fab/ # Manufacturing files
│ ├── libs/ # Custom component libraries
│ └── src/ # KiCad source files
├── case/ # 3D case design files
├── firmware/ # ESP32 firmware
│ ├── src/ # Source code
│ └── platformio.ini # PlatformIO configuration
├── images/ # Project photos
└── README.md # This file
Note: A complete list of all components can be found in
board/bom/smart-projector-remote-bom.csv
board/fab/1.0.0/board/bom/smart-projector-remote-bom.csvcase/case-bottom.stepcase/case-top.dxfcase/case-top-drawing.pdffirmware/ folder in PlatformIOpio run --target upload
The firmware includes pre-configured NEC IR codes for a TOPTRO X1 projector:
Note: Current firmware only uses power on/off, source switching, and OK commands. Other commands are included for future functionality.
pio run -t monitor
*** WIFI CREDENTIALS DATA NOT FOUND. YOU MAY CONFIGURE BY TYPING 'W <RETURN>'.W and press Enter to enter WiFi configuration modeWiFi Connected! with IP addressDEVICE NOT YET PAIRED -- PLEASE PAIR WITH HOMEKIT APP4663-7726 (standard HomeSpan code)Note: Currently only power on (with auto switching to HDMI 1) and power off functionality is supported.
Note: The project is configured for a TOPTRO X1 projector.
The firmware can be easily adapted for other projectors by updating the IR command codes:
firmware/src/main.cppCreate scenes like "Movie Time":
Or "Bed Time":
This project is licensed under the MIT License - see the LICENSE file for details.
Bence Háromi - 2025
No comments yet. Be the first to ask about this board.