BrowseBoardRepo

rpi-dbt03

Public

@bildschirmtext

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 13 files, ready to open in KiCad165 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip195 KBGerbers and drill zip: rdi_dbt03_multiplexer95 KBPick and place (CSV)3.1 KBPick and place (CSV): rdi_dbt03_multiplexer884 BPCB BOM CSV (PCB SVG)2.4 KBPCB BOM CSV (PCB SVG: rdi_dbt03_multiplexer)713 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)6.0 MB3D model (GLB): rdi_dbt03_multiplexer7.0 MB
Browse all files

Share rpi-dbt03

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/bildschirmtext/rpi-dbt03

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

rpi-dbt03

Hardware, Software and Firmware for a Raspberry Pi to DBT-03 adapter

There is now a possibility to directly patch a Bookworm Raspbian image.

Run ./patch_image.sh <imagename> as root. It only works on uncompressed images. You can then dd that image onto your SD-card or use the Raspberry Pi Imager. The later also allows you to set settings. The image will reboot multiple times.

The boot partition can also hold a btx_config.txt file where you can configure the host to connect to.

BTX_HOST=btx.clarke-3.de
BTX_PORT=20000

Old way of installing it

On the Raspberry PI check out this repository.

Install the packages in install-packages.sh (run it as root).

Enable spi with raspi-config.

Change the baudrate of the programmer "linuxspi" to a smaller value 40000 is OK. This setting is found in /etc/avrdude.conf

This currently is still incomplete.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.