Loading 3D model… large boards can take a moment.
The Boardoza HP303B Breakout Board is a compact and low-power digital barometric pressure and temperature sensor designed for applications requiring high accuracy and long-term stability. Based on a capacitive pressure sensing principle, the HP303B delivers precise measurements even under changing temperature conditions, making it suitable for demanding environmental sensing tasks.
Each HP303B sensor is individually calibrated at the factory and includes a 24-bit internal signal processor that converts raw sensor data into accurate pressure and temperature values. With support for both I²C and SPI communication, an integrated 32-sample FIFO, and optional interrupt functionality, this breakout board is ideal for IoT devices, wearables, mobile electronics, weather stations, altitude measurement systems, and battery-powered sensor nodes.
| Front Side | Back Side |
|---|---|
Model: HP303B
Manufacturer: Boardoza
Manufacturer IC: HOPERF
Functions: Digital Barometric Pressure and Temperature Sensor
Supply Voltage: 3.3 V – 5 V
Interface: I²C, SPI
Pressure Measurement Range: 300 hPa – 1200 hPa
Pressure Precision: ±0.005 hPa (high precision mode)
Relative Accuracy: ±0.06 hPa
Absolute Accuracy: ±1 hPa
Temperature Accuracy: ±0.5 °C
Pressure Temperature Sensitivity: 0.5 Pa/K
Measurement Time:
Average Current Consumption:
FIFO Buffer Depth: 32 samples
Operating Temperature: -40 °C to +85 °C
Board Dimensions: 20 mm x 20 mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | 3V3-5V | Positive Power Supply |
| 2 | SDO | I²C: Address LSB / Interrupt SPI: MISO / Interrupt |
| 3 | CSB | I²C: Not used (leave open) SPI: Chip Select |
| 4 | SDA | I²C: Serial Data SPI: MOSI (4-wire) / Data (3-wire) |
| 5 | SCL | I²C: Serial Clock SPI: Serial Clock |
| 6 | GND | Ground |
| Jumper | Description |
|---|---|
| JP1, JP2 | SPI mode: Open (default) I²C mode: Short |
| JP3 | I²C Address 0x77: Open (default) I²C Address 0x76: Short |
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.