Loading 3D model… large boards can take a moment.
The Boardoza INA250A1 is a high-precision current-sense breakout board based on the Texas Instruments INA250A1 integrated current shunt monitor. It combines a precision differential amplifier and an internal 2 mΩ shunt resistor, enabling accurate current measurements with minimal external components.
This breakout board is suitable for both unidirectional and bidirectional current sensing applications. Making it ideal for power monitoring, energy management, motor control, battery systems, and industrial applications where accurate current measurement is critical.
| Front Side | Back Side |
|---|---|
Model: INA250A1
Manufacturer: Boardoza
Manufacturer IC: Texas Instruments
Functions: Precision current sensing
Supply Voltage: 2.7 V – 36 V
Maximum Input Current: 15 A (Max)
Shunt Resistance: 2 mΩ (internal)
Gain: 200 mV/A
Output Type: Analog voltage
Measurement Type: Unidirectional / Bidirectional
Operating Temperature: -40 °C to +125 °C
Board Dimensions: 40 mm × 40 mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VS | Device power supply (2.7 V – 36 V) |
| 2 | REF | Reference voltage input |
| 3 | OUT | Analog output voltage |
| 4 | GND | Ground |
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | IN+ | Current sense input (supply side) |
| 2 | IN- | Current sense input (load side) |
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.