Loading 3D model… large boards can take a moment.
The Boardoza OPT4048 Color Sensor Breakout Board is a high-precision optical sensing solution designed for accurate ambient light and color measurement. Based on the Texas Instruments OPT4048, it provides high-resolution color sensing, ambient lux measurement, and correlated color temperature (CCT) calculation. Its advanced 26-bit measurement architecture and automatic full-scale range detection allow it to accurately measure both very low and very high light levels without requiring manual calibration or range switching.
Designed for reliable operation in demanding environments, the OPT4048 features excellent infrared rejection, making it suitable for use behind dark or tinted optical covers. The board supports continuous and one-shot measurement modes, programmable conversion times, threshold detection, interrupt generation, CRC-protected(Cyclic Redundancy Check) data, and a high-speed I²C interface for dependable data acquisition. These features make it ideal for smart lighting, automatic display brightness control, camera white balance, environmental monitoring, medical devices, and industrial optical sensing applications.
| Front Side | Back Side |
|---|---|
Model: OPT4048
Manufacturer: Boardoza
Manufacturer IC: Texas Instruments
Supply Voltage: 3.3V – 5V
I/O Logic Level: 3.3V
Functions: Ambient light sensing, lux measurement, chromaticity measurement, CCT calculation, color sensing
Interface: I²C (Up to 2.6 MHz Fast-mode Plus)
Operating Current: Typical 24 µA (for sensor only)
Standby Current: Typical 2 µA (for sensor only)
Dynamic Range: 26-bit
Measurement Range: Up to 144,284 lux
Conversion Time: 600 µs – 800 ms (Programmable)
Measurement Modes: Continuous and One-shot
Interrupt Support: Programmable threshold interrupt
Data Integrity: CRC protected registers with sample counter
Operating Temperature: -40°C to +85°C
Board Dimensions: 20mm × 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VIN | Power Supply (3.3V–5V) |
| 2 | INT | Open-drain Interrupt Output |
| 3 | SDA | I²C Serial Data |
| 4 | SCL | I²C Serial Clock |
| 5 | GND | Ground |
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.