Loading 3D model… large boards can take a moment.
The Boardoza Water Sensor Breakout Board is a compact and practical liquid detection solution designed to measure and monitor water levels using conductive trace sensing technology. The board produces an analog output signal that changes according to the amount of water in contact with the sensing traces, making it easy to interface with microcontroller ADC inputs such as Arduino, ESP32, STM32, and Raspberry Pi Pico.
This sensor is ideal for applications such as water tank monitoring, leak detection systems, smart irrigation, overflow alarms, home automation projects, and industrial liquid level sensing. Its simple interface and compact design allow easy integration into embedded systems, IoT devices, and educational electronics projects.
| Front Side | Back Side |
|---|---|
Model: Water Sensor
Manufacturer: Boardoza
Sensor Principle: Conductive Trace Based Water Level Detection
3.3VDC – 5VDC
3-Pin Header Connector
Analog Signal
Water Detection / Water Level Monitoring
Analog Output
-40°C to +85°C
20mm x 58mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VCC | Supply Voltage |
| 2 | SGN | Analog Signal Output |
| 3 | GND | Ground |
This repository contains both hardware and software components:
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
All software and firmware are licensed under BSD 3-Clause License.
No comments yet. Be the first to ask about this board.