Boardoza_XL6019E1_DC_DC_Boost_Breakout_Board
PublicLoading 3D model… large boards can take a moment.
Boardoza XL6019E1 DC-DC Boost Converter Breakout Board
The Boardoza XL6019E1 is a high-efficiency DC-DC boost converter breakout board built around the XL6019E1 switching regulator IC. It is designed to step up low DC input voltages to higher, regulated output voltage levels while maintaining high efficiency and stable operation.
This board is well suited for industrial electronics, robotics, LED drivers, automotive systems, battery-powered projects, and embedded applications where higher voltage outputs such as 12V, 24V, 36V, or 48V are required from lower-voltage sources. Its compact size and simple pinout make it ideal for both prototyping and final product integration.
Click here to purchase!
| Front Side | Back Side |
|---|---|
Key Features
- Wide Input Voltage Range: Supports input voltages from 5V to 40V, allowing operation from a wide variety of DC power sources.
- Selectable Output Voltage Levels: Provides regulated, selectable output voltages of 12V, 24V, 36V, or 48V to suit different system requirements.
- High-Efficiency Boost Conversion: Designed for high performance with efficiency levels of up to 94%, minimizing power loss.
- Fixed Switching Frequency: Operates at a stable 180 kHz switching frequency for predictable and reliable behavior.
- High Switching Current Capability: Supports up to 5A internal switching current, suitable for demanding boost applications.
Technical Specifications
Model: XL6019E1
Manufacturer: Boardoza
Manufacturer IC: XLSEMI
Input Voltage: 5V – 40V
Output Voltage: 12V, 24V, 36V, 48V (Selectable)
Converter Type: DC-DC Boost Converter
Maximum Output Current: Up to 2A (depending on input voltage and operating conditions)
Switching Frequency: 180 kHz
Maximum Switching Current: 5A
Operating Temperature: -40°C to +125°C
Board Dimensions: 40 mm × 40 mm
Board Pinout
( J1 ) Input Connector
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VIN | Power Input (5V – 40V) |
| 2 | GND | Ground |
( J2 ) Output Connector
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VOUT | Boosted Output Voltage (12V / 24V / 36V / 48V) |
| 2 | GND | Ground |
Board Dimensions
Step Files
Datasheet
Version History
- V1.0.0 – Initial Release
Support
- If you have any questions or need support, please contact [email protected]
License
Hardware Design
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
No comments yet. Be the first to ask about this board.