Browse hardware designs
BoardRepo is the GitHub for hardware. View any KiCad schematic, PCB, and BOM in your browser and download the sources, no install and no account needed.
Public designs
using ESP32C3 chip to collect and analyze air quality data
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors. Add a speaker and microphone and you have the kitchen sink too! Click the link below to configure a new device.
LibreCellular RF Front-End Hardware Design
IOT BandSelector (also known as a Band Decoder) works with Antenna Switch Controller to perform automated antenna selection on band change
Custom keyboard using the caps from the Alcatel-Lucent MMK, built with Onshape and KiCad
Saul Sanchez Abreu 20211867
Code and PCB designs for AutoBloomer MQTT sensor modules
Bearbeitet von Lukas
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
Reverse engineered Raspberry Pi Compute Module 5
Haptic input knob with software-defined endstops and virtual detents
Silversat Ground Station Radio Board
HW files of COBC
KiCAD Files for all WINTER (Wireless Inertial iNformation and Telemetry for Energetics Regulation) flight computer
Analog keypad with hall effect switches and rapid trigger for osu!
An experimental PC adapter for EPCOT —the PlayStation®VR2 headset— that splits USB Type-C® into DisplayPort video, USB 3 data and power. Intercepting its DP-AUX/SBU and CC side channels.
KiCad-designed Control and Power PCBs for a minesweeper competition robot, featuring an Arduino Mega, motor drivers, IMUs, and an automatic safe-shutdown circuit.
一个可以通过PD诱骗BOOST升压到24V（通过修改反馈电阻可调）输出的工具