Loading 3D model… large boards can take a moment.
CoBra is a Z80 computer designed in 1986 at ITCI, a research center in Brasov, Romania.
In its official version, its specs are:
It's a two-in-one machine, it can be either a ZX Spectrum compatible or a CP/M machine.
CoBra has three different memory maps: one for power-on, one for ZX Spectrum, and one for CP/M.
The memory configuration change is done in software, using the bit 7 of the R register.
On power-on, the memory map includes both ROMs, and RAM banks 0 and 1.
Cobra boots from the small 2K ROM, it can display on the screen and copy code to RAM.
Code can be copied from ROM for ZX Spectrum mode, and from the floppy interface for CP/M.
Tape interface can also be an option, which should be great for development.
After copying the code, it will switch the memory map to te desired architecture.
ROMs are disabled now and execution continues from the 64KB of RAM.
Many thanks to cobrasov.com, my main inspiration source in this endeavour.
You can find out a lot about this incredible machine on the website, including many improvements made to the original boards by the community.
Gerber files are also available there for these improved versions, all tested and working great!
This repo is a "revival" approach, aiming to re-create the original computer in Kicad, adding only some minor tweaks.
Current status:
Links:
No comments yet. Be the first to ask about this board.