KiCad and hardware projects using USB-C
Open USB-C hardware projects on BoardRepo, the GitHub for hardware. View the schematic, PCB, and BOM in your browser and download the KiCad sources, BOM, and Gerbers.
Projects
I made my 4 layers board wearble with microphone, ESP32 S3. Everything works but bluetooth is broken, can anyone tell my whyyyy
Project Caribou documentation, designs, and project artifacts.
rp2040 pro micro drop in
Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.
No description.
multi-ASIC Bitcoin miner
Charge your Dualshock 4 using the EXT port with this board.
A replacement board for a Wii U dock, with a USB type C connector.
Wall mounted 4 inch touch display panel with CM4 inside
A wireless ergonomic keyboard
The 2025 Hackaday Supercon RF Communicator Badge
The Open Book: Project Reboot
MUUU!: Livestock Smart Collar 🐮
An IOT device built of the raspberry pi
<<<<<<< HEAD NewSky📺 中文版本
The source for the environmental sensors used at Kwartzlab
Want to send measurements back to a server through HTTP or MQTT? This is about it along with the PCB design, 3D box and support for data storage with maticas API
using ESP32C3 chip to collect and analyze air quality data
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors. Add a speaker and microphone and you have the kitchen sink too! Click the link below to configure a new device.
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
Reverse engineered Raspberry Pi Compute Module 5
Haptic input knob with software-defined endstops and virtual detents
sp26-cmpe-195a-group-project-CMPE195_Template-1 created by GitHub Classroom
A collection of open source hardware that has been designed by Spaceboards
Analog keypad with hall effect switches and rapid trigger for osu!
An experimental PC adapter for EPCOT —the PlayStation®VR2 headset— that splits USB Type-C® into DisplayPort video, USB 3 data and power. Intercepting its DP-AUX/SBU and CC side channels.
一个可以通过PD诱骗BOOST升压到24V（通过修改反馈电阻可调）输出的工具
A retrofit board with an esp32 for a gameboy color case
Documentation and source files for my functional PCB business card
Submission for an interview assignment
BLDC Motor Control Project
Highly compact field oriented controller based on the DRV8313 IC
STM32G0B1-based telescope focuser/rotator controller — OnStepX firmware port + KiCad PCB
Bluetooth LE nRF52840 microcontroller in a pro-micro footprint.
Solar-powered RTU sensor HAT for transmission tower DLR deployment
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.
A keyboard personalized for myself, designed in KiCad, with custom firmware and a case, both written in Rust. Can sit on top of a macbook keyboard.
A 4x10 CFX spaced low-profile mechanical keyboard.
ESP-8266 Smart home dev board / general purpose IO for your home!
No description.
This is a DC-DC charging unit that has 5V, 2A input and outputs 12V, 350mA to 10-cell, 1.2V each, NiMH Battery pack (Dsub 15pin
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
A rep for soil and temperature measurement for automatic plant watering product
It's a custom computer for indoor bikes to measure cadence, speed and power, store sessions, visualise ongoing statistics and replace non chargeable solutions
Open source Vaporizer KiCad schematics (requires DIY PCB layout, would love it if someone contributed a laid out PCB but there's no expectation of that here!)
KiCad files for the JailSnapper USB jig, for the debugging and modification of the Snapmaker 2.0 touchscreen
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
BornHack Badge 2022
Simple Number Pad based on RP2040
Simple RP2040 based reflow oven controller (Work in Progress)
Motor driver PCB
Try to build an ESP32 firmware with LVGL and ST7789 drivers inside.
Type-A USB 双向电流电压表
No description.
USB power delivery solution for charging, or as a universal power source.
This is a small module that handles the USB PD negotiation and simply outputs a specific DC voltage.
A big QMK powered trackpad
No description.
OpenSource inline USB-PD Power meter
KiCad Electroncis Hardware. A 2xAA Battery or USB-C powered IR sensor bar compatible with the Nintendo Wii and Wii-U.