Loading 3D model… large boards can take a moment.
A BlackPill powered expansion board for Klipper 3D printers, allowing the use of numerous additional Thermistors.
if you are ordering a batch of PCBs, please for the love of god please use the pre-made gerber files in the Releases tab instead of downloading the repo, ignoring KiCADs warning you haven't got a font installed, and then exporting your own files which both have the I2C bus shorted out (rendering only 10 thermistor ports usable) due to the missing font breaking artwork on the copper layer plus has had markings crediting me destroyed.
UK / EU
Contact me on Discord if you want to add yourself to this list!
This BoM lists exclusively through-hole components, as SMD components will be assembled for you by JLCPCB
| Component | QTY | Cost | Comment | Sourcing URL |
|---|---|---|---|---|
| JST-XH 2-Pin | 26 | $0.39 | Thermistor Ports |
| JST-XH 4-Pin | 2 | $0.52 | I2C Ports | https://www.lcsc.com/product-detail/Wire-To-Board-Connector_JST-B4B-XH-A-LF-SN_C144395.html |
| 2.54 Socket, 1x20 | 2 | $0.81 | STM32 Socket | https://www.lcsc.com/product-detail/Female-Headers_Shenzhen-Kinghelm-Elec-KH-2-54FH-1X20P-H8-5_C2905423.html |
| 2.54 Header, 2x5 | 3 | $0.40 | GPIO; Cut-Down for SPI | https://www.lcsc.com/product-detail/Pin-Headers_HanElectricity-2541WV-2x05P_C5383106.html |
| STM32F401 Blackpill | 1 | $3.25 | Main controller | https://www.aliexpress.com/item/1005006127461676.html |
As of 09APR25 no ThermEX26 boards have been produced, thus only KiCad Renders are present currently
No comments yet. Be the first to ask about this board.