Loading 3D model… large boards can take a moment.
AtmosFC is an open-hardware quadcopter flight controller designed in KiCad. Powered by an STM32G4 MCU, it integrates high-performance sensors and peripherals, and is fully compatible with Betaflight (≥ 4.5).
The block diagram below shows the main hardware components and their interconnections.
AtmosFC runs Betaflight ≥ 4.5. You can either flash the precompiled Betaflight 4.5 firmware or build the latest from source.
betaflight_4.5.0_ATMOSFC.hex in betaflight_config/.> make configs
betaflight_config/ATMOSFC/ into betaflight/src/config/configs.> make ATMOSFC
.hex file will be located under betaflight/obj/.
Flash it using Betaflight Configurator (follow the steps from Option 1).
The repository is organized as follows:
├── hardware/
│ ├── atmos_fc/ # KiCad project files (.kicad_pcb, .sch, etc.)
│ ├── assembly/ # Fabrication files (Gerber, BOM)
│ └── lib/ # Custom footprints, symbols, 3D models
├── betaflight_config/
│ ├── ATMOSFC/ # Board configuration for Betaflight ≥ 4.5
│ └── betaflight_4.5.0_ATMOSFC.hex # Precompiled Betaflight 4.5 firmware
├── documentation/ # Schematic (.pdf), images, logo, block diagram
└── README.md
This project is released under the MIT License.
You are free to use, modify, and distribute it.
No comments yet. Be the first to ask about this board.