Imported from GitHub: Darbyshire64/EndevourDMX · commit 2271576 · license MIT
Description
This is a custom DMX Tranciver Platform Designed for both reciving and controling DMX. Using an ESP32-C3 With Onboard WIFI
README
EndevourDMX
This is a custom DMX Tranciver Platform Designed for both reciving and controling DMX. Using an ESP32-C3 With Onboard WIFI
[!Warning] Use This PCB at your own Risk. I cannot take liability if it breake's and or causes damage to equipment. This has not been tested and there is no garrentee of upholding to any level of quality/functionality.
https://github.com/user-attachments/assets/77d9e712-4af0-4d90-8f60-33b776832eaa
Curently Availible Firmware Modes
- Cable Tester
- Light Controler
Goals
- Control One DMX Universe
- Recive DMX and make signal qaulity Reports.
- WIFI Based Control.
- Display Status and Other INFO With Inbuilt OLED
How It Works
It allows for DMX Passthrough so if something where to hapen to the MCU the DMX signal Could still passthrough pasiveley without power. The A,B Data lines are protected by a TVS Diode and 100 ohm resistors this cleans up any interfearence in the transmision. this is then sent the the MAX845E Chip to convert the data into easy to recive serieal data for the ESP. As the DMX lighting protocol uses RS845 Serieal the MAX845E is neccesary to control TX/RX the signal.
Photos
PCB
Case
BOM
I know this BOM is Expensive But its cheaper than the equivlent device i was trying to redesign but better, Called MyDMX 3.0 witch is 401.74 USD
LINK
| QTY | Item | Price | Link |
|---|---|---|---|
| PCB Total | $14.59 | ||
| Component Total | $38.81 | ||
| Case Total | $4.50 | ||
| Misc Total | $13.36 | ||
| Total | $71.27 |
PCB
| QTY | Item | Price | Link |
|---|---|---|---|
| 5 | Custom Blue LF HASL PCB | $9.40 | |
| Shipping (GSDL) | $5.19 | ||
| Total | $14.59 |
Components
I have chosen Digikey because it has all of my components vs LCSC who has a few of my components in stock as of making the BOM. it would be more cost effective to buy all the components in one go rather than by two lots of shipping and handeling fees. and A OLEDs components are cheaper via Ali Express.
Digikey
| QTY | Item | Price | Link |
|---|---|---|---|
| 2 | 1.5KE15CA | $0.34 | LINK |
| 1 | 1N4007 | $0.10 | LINK |
| 1 | MFR-25FBF52-1K8 | $0.10 | LINK |
| 1 | CFR-12JB-52-3K3 | $0.10 | LINK |
| 2 | MFR-25FBF52-100R | $0.10 | LINK |
| 1 | MFR-25FBF52-120R | $0.10 | LINK |
| 1 | 2N3904 | $0.14 | LINK |
| 3 | WS281B | $0.68 | LINK |
| 1 | MAX485ECSA+ | $5.88 | LINK |
| 1 | IO-XLR3-F-EH | $2.63 | LINK |
| 1 | IO-XLR3-M-EH | $2.55 | LINK |
| 1 | XIAO ESP-32-C3 | $4.99 | LINK |
| 1 | 2.4Ghz Atenna | $2.20 | LINK |
| 1 | Headers | $0.24 | LINK |
| Shiping | $6.88 | ||
| Total Excl Shiping | $21.95 | ||
| Total Incl Shiping | $29.84 |
AliExpress
| QTY | Item | Price | Link |
|---|---|---|---|
| 1 | OLED DISPLAY | $5.35 | LINK |
| Total Excl Shiping | $5.35 | ||
| Toatl Incl Shiping | $8.34 |
Case
Printed With Printing Legion. Estmiated Shiping Cost Based on prevoious printing legion experiance.
| QTY | Item | Price | Link |
|---|---|---|---|
| 1 | Case | $4.50 |
Tool's & Misc
| QTY | Item | Price | Link |
|---|---|---|---|
| 1 | 10g Flux | $3.32 | LINK |
| 1 | 50g Solder | $10.89 | LINK |
| 1 | M3 Heatset Inserts | $2.03 | LINK |
| 1 | M3x14mm Screws | $2.94 | LINK |
| Total No Discount & Shiping | $19.81 | ||
| Total Incl Discounts & Shiping | $13.36 |
No comments yet. Be the first to ask about this board.