shuffle-o-matic

Shuffle-o-matic

Full overview video: https://www.youtube.com/watch?v=eMTXyl7tPEk

Thingiverse page (cad files): https://www.thingiverse.com/thing:4547302

Significant experience recommended if you want to take on this project, it isn't documented very well :)

Hardware required

Qty	Item	Supplier
	3D printed Parts
3	Nema 17 stepper motors, <=40mm long	17HS15-1504S-X1 39mm long
5	Gates GT2 20t idlers with standoffs
3	Gates GT2 20t drive pulleys
1	MG90S servo	MG90S servo
1	600rpm micro gearbox motor	DC 3V 6V 12V GA12-N20
2	MGN9 linear profile bearings, 135mm len	MGN9C
1	MGN9 linear profile bearing, 95mm len	MGN9C
6	6700 bearing	6700ZZ
1	Raspberry Pi
1	(optional) Raspberry Pi Camera V1.4
1	(optional) 3x 3mm white led
1	Adafruit Feather
1	Breadboard/pcb for laying out components
~	Assorted M2 and M3 nuts and bolts

All part numbers in the pcb should be accurate, though again review and order at your own risk. Use KiCad to view/edit, it's free!

And probably a few other things I'm forgetting. Seriously if you want to make this, do so at your own risk. Review the cad model yourself and make sure you have everything accounted for! This is not a project for beginners!