Description

Master KiCad 10 in just 7 steps! In this video tutorial, I will show you how to design your own PCB in KiCAD10.
I will use a ESP32-S3 USB development board from a previous video as example and guide you through the design process in 7 steps:

• Step 1: Schematic Design & Workspace Setup
• Step 2: Component Selection & Footprint Assignment
• Step 3: Creating Custom Schematic Symbol (USB PCB Connector)
• Step 4: Designing Custom PCB Footprints
• Step 5: PCB Outline & Component Placement
• Step 6: Track Routing & Ground Copper Fills
• Step 7: Design Rule Check (DRC) & Exporting Gerbers

Finally we will order, build & test the PCB.

You can order the PCB Directly at PCBWay:

Watch the YouTube video, it will guide you through the process step by step:

Link to the GitHub with assembly instructions: https://github.com/DesignGraveyard/V001_ESP32_bad_USB

For good contact the USB connector thickness is 2mm to 2.2mm, please check the instruction video and GitHub for the ESP32 "Bad USB" for more information.

Download KiCAD10 here: www.kicad.org and ...please make a donation to the KiCAD team!