Imported from GitHub: es-ude/elasticai.hardware · commit 56a0a44 · license MIT

Description

Schematics and Board design for ElasticNodeHardware

README

This folder hosts prebuild firmware for hardware test or example purposes. The current prebuild are:

• factory_MINI-1.bin for the EPS32-C3 module on the extension board with enabled logs.
• factory_MINI-1-Silence-Mode.bin is the same as above but enables silence mode.
• test_esp_at.uf2 is the file for quick check if the esp32 is well connected to ENv5.
  • after you flash it to the RP2040, connect it via screen or putty, and send the 't' to the board, and it starts the test.
  • It automatically connects to ES-Stud, and start ping an IP address, as long as you see it comes to the ping test stage, which means the connection between boards is fine.