BrowseBoardRepo

cbr_custom_cluster

Public

@ethansousaprojects

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 90 files, ready to open in KiCad2.0 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip291 KBGerbers and drill zip: Cicuit_Bar85 KBGerbers and drill zip: Circuit_Accel_Gyro41 KBGerbers and drill zip: Circuit_Alphanumeric41 KBGerbers and drill zip: Circuit_GPS41 KBGerbers and drill zip: Circuit_Pulse_Count63 KBGerbers and drill zip: Circuit_RPM_TO_PWM38 KBGerbers and drill zip: Circuit_Stepper60 KBPick and place (CSV)6.4 KBPick and place (CSV): Cicuit_Bar1.4 KBPick and place (CSV): Circuit_Accel_Gyro217 BPick and place (CSV): Circuit_Alphanumeric213 BPick and place (CSV): Circuit_GPS294 BPick and place (CSV): Circuit_Pulse_Count491 BPick and place (CSV): Circuit_RPM_TO_PWM226 BPick and place (CSV): Circuit_Stepper347 BBOM CSV16 KB
Schematic PDFEvery sheet, to read or print299 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)9.4 MB3D model (GLB): Cicuit_Bar3.2 MB3D model (GLB): Circuit_Accel_Gyro1.1 MB3D model (GLB): Circuit_Alphanumeric1.1 MB3D model (GLB): Circuit_GPS1.1 MB3D model (GLB): Circuit_Pulse_Count2.1 MB3D model (GLB): Circuit_Stepper1.8 MB
Browse all files

Share cbr_custom_cluster

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/ethansousaprojects/cbr-custom-cluster

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

CBR_Custom_Cluster

A custom cluster design for my CBR 125RW6 (2006 carburetor model) to replace the old large mechanical cluster with a smaller simpler design.

The references folder contains details on set things on the bike (eg. hole position dimensions, resistance of stock sensor) and thus design requirements, calculations and decisions can be found here.

License

There are three licenses for this project. All code falls under the AGPLV3 license, all hardware designs fall under the CERN-OHL-S license, all artwork and documentation in the READMEs related to this project are under the CC By-SA license.

This project is based around creating a dash for a honda motorcycle. I have no affiliation with honda or its subsidiaries. This is not an official honda project in anyway.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.