quackfire-controller

Quackfire controller rev1

This is a replacement controller for the CM Quickfire Rapid. Everything works, except for the WinLock LED (which isn't connected to the controller).

Building

If you feel like building a few of these PCBs yourself, go to the 'Releases' tab and download the latest gerber files. Order those at your favourite PCB manufacturer, get the components needed (see below) and solder them on! A hot air station is not required but a good soldering iron is. Flux is recommended.

Opening the project

To open the files you will need the latest KiCAD nightly version.

Bill of materials (BOM)

Amount is per PCB, multiply as needed.

LCSC part #	Description	Value	Package	Amount
C83060	Capacitor	0.1uF	0603	4
C131056	Capacitor	4.7uF	0805	1
C302042	Capacitor	1uF	0603	1
C261942	Fuse		0805	1
C98220	Resistor	10K	0603	2
C12028	Resistor	5.1K	0603	2
C384264	Resistor	22	0603	2
C44854	MCU	32U4	QFP-44	1
C341521	Resonator	16MHz	SMD	1
	2x10 2.00mm pin header		THT	2