BrowseBoardRepo

scarter

Public

@gbrown128

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 10 files, ready to open in KiCad87 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip379 KBGerbers and drill zip: crosspoint-breakout89 KBPick and place (CSV)19 KBPick and place (CSV): crosspoint-breakout3.9 KBPCB BOM CSV (PCB SVG)12 KBPCB BOM CSV (PCB SVG: crosspoint-breakout)2.8 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)16 MB3D model (GLB): crosspoint-breakout1.4 MB
Browse all files

Share scarter

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/gbrown128/scarter

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

SCARTer

Over-engineering a multi-way SCART source switcher for retro consoles.

Note this project is currently in active development.

A 12-input, 3-output SCART RGB crosspoint switch. Designed to deliver signals from an array of consoles to the two TVs and a capture card in my retro games setup.

The system can copy the signal from any one source to all three outputs without loss of signal integrity, or send different inputs to each output, or any combination inbetween.

Switching is performed by the FMS6501 12x9 video switch matrix IC. The system is controlled by two ATMEGA328s, one in the remote switching matrix and another in user input control box.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.