Loading 3D model… large boards can take a moment.
Firmware for ESP32 boards hosting a minimal web UI to safely arm and trigger a high‑voltage initiator. AsyncTCP + ESPAsyncWebServer power a WebSocket control channel; configuration persists via Preferences.
Trigger-Remote / lollipop, IP 10.11.12.1./ws for telemetry (~250 ms) and commands.single or buzz, width, spacing, repeat.W/S/R values (e.g., 31/38/3), AP name; reconnect overlay while WS is down.library-notes.txt.buildAndBurn.ps1 (or buildAndBurn.bat wrapper)chmod +x buildAndBurn.sh && ./buildAndBurn.sh
Scripts prompt for sketch, FQBN, clean, port selection, upload, and can open a serial monitor.hv_trigger_async.ino and Upload.Trigger-Remote and open http://10.11.12.1/.arduino-cli upload -p 10.11.12.1:3232 --fqbn esp32:esp32:esp32 hv_trigger_async.ino (replace FQBN for ESP32‑S3).single or buzz.README.build.md.arduino-cli monitor -p COMX -c baudrate=115200.powershell -ExecutionPolicy Bypass -File tools\\test_ws.ps1See docs/WS_API.md for WebSocket message formats, examples, and flows.
hv_trigger_async.ino: setup/loop, telemetry tick, indicators.web_server.cpp/.h: AP setup, async server, WebSocket, inline UI, actions.config.h: pins, SoftAP settings, defaults; edit pins here if needed.hardware_kicad/ (schematics *.kicad_sch, board *.kicad_pcb).hardware_kicad/.Change the default SoftAP password before field use. Treat the trigger output as live hardware — validate with a dummy load first.
v1.21a marks the working prototype snapshot.
No comments yet. Be the first to ask about this board.