Imported from GitHub: hazels-garage/bad-wings · commit 0bef3c6 · license CC-BY-SA-4.0

Description

Bad Wings

README

Bad Wings v1

The original Bad Wings.

Features

• 36 key, hotswap, choc spaced
• Cirque touchpad
• Gengle splay on ring and pinky columns
• Pre-soldered diodes, shift register and cirque connector
• Pre-assembled and kits

Cases

Original | Inset (Coming Soon)

Build Guide

• Install Switch Hot Swap Sockets
• Install XIAO Sockets
• Install Pins on XIAO
• Connect ribbon cable to Cirque touchpad
• Connect Cirque to PCB
• Flash Firmware
• Test Cirque and switches
• Disconnect Cirque cable from PCB
• Secure Cirque to top case (dab of hot glue)
• Insert PCB into top case, feed ribbon cable through hole
• 5mm screws through the top of the case and PCB, into standoffs
• Reconnect ribbon cable to PCB
• 3mm screws through bottom of case into standoffs
• Done.