Imported from GitHub: hugelton/Btns · commit 1e12e3d · license MIT

Description

Buttons board compatible with monome grid

README

Btns

Buttons board compatible with monome grid

Overview

Btns is a clone of Monome Grid.

**⚠️ It doesn't support 16 levels of LED grey scale. It just turns on or off. **

Make

Hardware

Make your board from the gerber.

BOM

• Raspberry Pi Pico (or same footprint clones) * 1
• TSHD-T-2.8T2 SMD Tact switch with LED * 64
• 1N4148WS (SOD-323) SMD diode * 64
• TM1640 LED segments driver * 1
• 10k THT resistor * 2
• 10ohm THT resistor * 1
• MPU-6050 (optional for tilt mod)
• VXO7803-500 (optional)
• Eurorack 16pin Bus Conn (optional)

Firmware

upload the firmware to Pico from Release.

Test (on Norns)

Please use okyeron's grid-test

;install https://github.com/okyeron/grid-test

Plans

• support MPU-6050 (tilt)
• support multi-PWM
• support other buttons

Acknowledgments

Based on okyeron's neotrellis-monome project.