Loading 3D model… large boards can take a moment.
temperator is a robust and easy-to-use measurement system for taking 8 temperatures and 2 AC currents. Its design is simple yet professional. No special knowledge is required for operation. In addition to the hardware, a configuration for operation with ESPHome is provided in a separate repository. This makes integration with Home Assistant or other home automation systems very easy. Besides legacy Home Assistant connectivity, MQTT as interface protocol is also supported.
Each measurement channel is handled individually. This avoids the very common incompatibilities and difficulties in use when connecting multiple OneWire sensors together. E.g. it takes less than one minute to exchange a sensor - no more struggling with DS18B20's unique ids. Sensors with a cable length of more than 10 meters can be used without any problems. To adjust to the CT's type you can set a separate gain for each current transformer.
Particular emphasis was placed on ease of use and robust operation and favorable overall costs. A 2-layer board was sufficient for the PCB.
Further design goals of this project included:
As micro-controller an Arduino Nano ESP32 is used. This, or compatible models, offer sufficient resources to program even more complex control systems. It also allows the use of MicroPython, alternatively. Maybe, but that was no design goal, other Arduino Nanos can be used as well.
Here are some impressions of a fully assembled temperator:
As EDA system KiCAD 9.06 was used (Great EDA tool).
temperator is subject to the "CERN OHL V2 Weakly License".
No comments yet. Be the first to ask about this board.