Loading 3D model… large boards can take a moment.
A custom-designed PCB Business card inspired by isayx & ghastly. The main goal was to include an NFC chip/antenna to send a portfolio and a heart-rate sensor linked to LEDs as a fun way to create interactions.
I mainly worked on this because I wanted to challenge to construct my fully polished PCB device, and to get my foot in the door in learning electronics, KiCAD, and some SVG editors.
Note: Ground Pour on Back Layer is not shown in these images
| Designator |
|---|
| Part Kind |
|---|
| Part # |
|---|
| Manufacturer |
|---|
| Product link |
|---|
| Qty |
|---|
| Total Price ($) |
|---|
| C1 | 0.1uF | CC0805KRX7R9BB104 | YAGEO | https://jlcpcb.com/partdetail/YAGEO-CC0805KRX7R9BB104/C49678 | 2 | 0.0184 |
| C2 | 10uF | GRM21BR61H106KE43L | Murata Electronics | https://jlcpcb.com/partdetail/439567-GRM21BR61H106KE43L/C440198 | 2 | 0.6418 |
| D1,D2 | LED | NCD0805R1 | Foshan NationStar Optoelectronics | https://jlcpcb.com/partdetail/85425-NCD0805R1/C84256 | 4 | 0.0532 |
| R1,R2 | 330 | 0805W8F3300T5E | UNI-ROYAL(Uniroyal Elec) | https://jlcpcb.com/partdetail/18318-0805W8F3300T5E/C17630 | 4 | 0.0108 |
| R3,R4 | 4.7k | 0805W8F4701T5E | UNI-ROYAL(Uniroyal Elec) | https://jlcpcb.com/partdetail/18361-0805W8F4701T5E/C17673 | 4 | 0.0084 |
| U1 | MAX30102 | MAX30102EFD+T | Analog Devices Inc./Maxim Integrated | https://jlcpcb.com/partdetail/7407610-MAX30102EFDT/C6454833 | 0 (2) | 0 (26.26) |
| U2 | ATtiny85-20S | ATTINY85-20SU | Microchip Technology | https://jlcpcb.com/partdetail/MicrochipTech-ATTINY8520SU/C31540447 | 0 (2) | 0 (5.16) |
| U3 | NT3H2211W0FHKH | NT3H2211W0FHKH | NXP Semicon | https://jlcpcb.com/partdetail/NXPSemicon-NT3H2211W0FHKH/C2905792 | 0 (2) | 0 (1.88) |
| BT1 | CR2032-BS-6-1 | CR2032-BS-6-1 | Q&J | https://jlcpcb.com/partdetail/QJ-CR2032_BS_61/C70377 | 0 (2) | 0 (0.28) |
| Total: | $0.74 ($0.37 per Card) | |||||
| Full Total (including NFC, battery, and sensor): | $34.32 ($17.16 per Card) |
Note: I decided I'd buy the NFC chip, Attiny, Battery Cell & Holder, & Heartbeat myself, which is why they have 0 listed for price and quantity. The main cost is the Heart Rate/Oximeter sensor. I'm not sure if I could've found a cheaper option, so this may be a one-off thing
Note: Order from JLCPCB, which only includes the capacitors, LEDs, and resistors. I think a good chunk of this cost is the manufacturing, but I'm also completely new to this process, so I'm not sure what a 'good' price is. I do believe this is justifiable enough?
Note: The price went up, because my special order time ran out. It only went up by 2 dollars though.
No comments yet. Be the first to ask about this board.