BrowseBoardRepo

nanodeploy

Public

@lithosphererocketry

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 15 files, ready to open in KiCad191 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip87 KBGerbers and drill zip: NanoProgrammer70 KBPick and place (CSV)2.5 KBPick and place (CSV): NanoProgrammer1.3 KBBOM CSV6.6 KB
Schematic PDFEvery sheet, to read or print119 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)1.9 MB3D model (GLB): NanoProgrammer1.5 MB
Browse all files

Share nanodeploy

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/lithosphererocketry/nanodeploy

This link opens the latest version. Copying it does not grant additional access.

Loading 3D model… large boards can take a moment.

README

NanoDeploy

Firmware

Firmware for NanoDeploy is located in the firmware directory. Most day-to-day operations are handled by that folder's Makefile.

Build environment setup

The setup process for TI's MSP430 toolchain is pretty miserable on modern Linux. See firmware/install-notes.md for details.

Uploading

Run make run to upload the code to an attached MSP430 development board.

Debugging

Run make gdb to upload the code to the attached dev board and start a GDB server session. From a separate terminal, then run msp430-gdb. (The included .gdbinit file should take care of all the necessary setup.)

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.