Loading 3D model… large boards can take a moment.
This project is a PCB bord that has the following measurement and control input/output:
The documentation for the pin map can be found in the Documentation folder. Also all the article numbers for each component can be found in at the DAC ADC PWM IO.sch file in the PCB folder. Just double click on a PCB symbol and see the Mouser Electronics article number of the electrical component.
Yes, it's possible to set the calibration to each input in this project. You need to have the ILI9341 touch LCD with SPI bus. Open the STM32 PLC Pinouts.pdf and see the connection for the LCD. You can also set the PWM frequency and analog input gain for the ADC and Differential ADC at 16-bit.
The STM32 PLC has internal SAE J1939 protocol. Made from Open-SAE-J1939.
This is a QT C++ software that you can connect to your STM32 PLC board via the USB and then you can send signals from OpenSourceLogger and recieve signals. OpenSourceLogger is a very easy to use logging and controlling software and it stores data at a SQL server.
The STM32 PLC has a lot of functions you can select by touching the LCD.
PCB folder and open the .pro file with KiCAD and greate a gerber file of your own choicegerber file and let them produce the board for youMouser ElectronicsCode project and import the .ioc project file using STM32CubeIDEC code by using ST-Link V2 connectionIt's done. I don't plan to update this project. Everything is working and it will remain that way.
No comments yet. Be the first to ask about this board.