🐭 MAUS

Arduino-Based Mouse Jiggler

MAUS is a compact Arduino-based device that simulates mouse movements to prevent screensavers and keep your computer active. Small, fun, and fully programmable, it also adds a splash of RGB flair to your workspace! ✨

---

📸 Gallery

---

🛒 Where to Buy

---

🔹 Overview

MAUS generates small, fake mouse movements (1 pixel up and down) to keep your computer active and disable screensavers.
Perfect for automation without interaction and a little ambient light fun! 💡

---

⚙️ Features

• MCU: ATtiny85
• LEDs: Red LED on PB0, WS2812B RGB LED on PB1
• Free pins: PB2, PB3, PB4 (programmable)
• Default Fuse Settings:
  • Lfuse: 0xE1 – PLL Clock + Startup 64 ms
  • Hfuse: 0xDD – External Reset pin enabled (Pin5 not usable as I/O) + BOD 2.7V + Enable Serial Program/Data Downloading
  • Efuse: 0xFE – Self programming enabled
• Plug & Play: Arduino firmware pre-installed
• PlatformIO support with a custom MAUS board

---

💻 Software

• Fully open-source Arduino code and KiCad schematics
• Adafruit Neopixel Library required for RGB functionality
• Micronucleus bootloader info: Micronucleus GitHub
• Modify and customize the software to your needs

---

📦 Installation & Usage

1. Plug MAUS into a USB port
2. Observe the LED lights and simulated mouse movements
3. Optional: Modify Arduino code for custom behaviors or RGB animations

---

🔗 Links & Resources

• GitHub Repository – source code, schematics, firmware
• Tindie Store – purchase MAUS

---

🌟 Tagline

No more sleepy screens. No more endless logins.
Just movement… with light.
MAUS: your silent digital sidekick. 🖱️✨