Imported from GitHub: makespacemadrid/ApolloVentilator · commit 3774e3e · license GPL-3.0

Description

Nos gustaría ser el Marlin de los ventiladores :)

README

ApolloVentilator

Information: Checkout our wiki

Schematic

Prototype 1 @ MakeSpace Madrid

Prototype 2 @ Miguel's Workshop

Getting started

Linux

$ apt-get install libcairo2-dev libgirepository1.0-dev python3-cairo-dev

Mac

$ brew install pygobject3 gtk+3 libnotify

App (Python 3)

From ./gui

Install system dependencies (Debian-based):

$ pip install -r requirements.txt
$ ./main.py

Requirements:

2 ventilators mode

• Pressure Regulated Volume Controlled (PCV): set pressure delivered during period of inspiration. The voume measured is shown as data on display.
• Volume Regulated Pressure controlled (VCV): The tidal volume is set and it adapts the pressure to the lowest. Here the important data are: tidal volume, upper alarm and lower current volume. Useful parameters: tidal volume, respiratory rate. There is a limit pressure and during inspiration period.

If patient stops breathing, there is a failsafe that set to mandatory breathing when it's detected.

During inspiration:

• Inspiration pressure: The plateau pressure is adjusted to volume hard limit (32 cmH2O by default, and could increate to 70cmH2O)

• Peak pressure: 2cmH2O greater than plateau.

• VCV pressure limit (15-40cm2 with increments of 5)

• Failsafe valve that opens always at 80cmH20 (or lower)

• PEEP: 5-10 with increments of 5. The circuit must be pressured.

• IE ratio: 1:1, 1:2, 1:3

• Respiratory rate: 10-30 bpm with increments of 2.

• Tidal volume: 40ml +-10, 350 +-50, 250-600 +-50,up to 8000.

• Weight body and volume calculated based on 6ml/kg.

Alarms

• Gas failure
• Electricity failure
• Machine switched off
• Inspiration pressure exceeded
• Inspiration pressure not achieved
• PEEP pressure not achieved
• Tidal volume not achieved
• Tidal volume exceeded
• Resistance: peak pressure - plateau pressure > 2cmH2O
• Compliance
• Volume Leakage

Monitoring

Settings

• Tidal volume
• Frequency
• PEEP
• FI02
• Ventilation Mode

Current status

• Tidal volume
• Breathing rate
• PEEP
• Plateau pressure
• FI02

The normal healthy O2 consuption is 250mL/min, and could be increased until, for example 500 mL/min in a sepsis.

Parallel measures

• Presión arteria
• Frecuencia cardiaca
• ECG
• Nivel de sedación
• Posicion del tubo e inflado del neumotaponamiento
• Intercambio gaseoso (pulsiometria SO2), capnografía y gasometrías arteriales periodicas para obtener los índices de oxigenación (clave para evaluar la desintubación del paciente).