Loading 3D model… large boards can take a moment.
This project is a PCB that contains an ADF4158 direct modulation/waveform generating fractional-N frequency synthesizer and a HMC391 3.9 - 4.45 GHz VCO. The board is primarily intended as an LO source for a 10 GHz FMCW radar inspired by the ADALM-PHASER. The VCO output can be used with a subharmonic mixer and an IF around 1.6 GHz to cover the 10 - 10.5 GHz amateur radio band.
The board runs from a 12 - 16 VDC supply, exposes all the control pins of the ADF4158 in a 2.58 mm pin header (3.3V logic) and includes an optional 10 MHz reference input. The BOM cost is around 45€.
The PLL loop filter has been design with ADIsimPLL. The design file is ADF4158_HMC391.pll.
Outputs for the latest commit in the main branch are built by CI and published
to Github pages. Additionally, outputs for each commit are published as a Github
artifact.
The BOM for this project is available as a DigiKey list.
The PCB is intended to be fabricated on JLCPCB using the following options:
These options are very inexpensive: $5.80 for qty. 5, $9.00 for qty. 30.
No comments yet. Be the first to ask about this board.