Open Source Hardware Projects

Open source hardware. The projects listed below have gerbers of which PCBs can be ordered. The schematics and PCB layouts are created using KiCAD. They can be read using the KiCAD programs. I prefer OSHPark as my PCB vendor, but use the fab you prefer.

• 8-pin 7.5mm X 5.85mm SOIC breadboard adapter.

Licensing

Open source hardware projects

Copyright (C) 2021 Matthew Hardenburgh

This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License along with this program. If not, see https://www.gnu.org/licenses/.

Disclaimer

As stated in the licensing section, these hardware schematics are provided without ANY WARRANTY. This means that I am not responsible for blowing up your power supply, causing any physical damage or injury or starting international thermoculear war. While I have done my best to release a product that is "of quality", it falls to be YOUR responsibility to vet the schematic and PCB layout for shorts, bad connections, or anything else that could be wrong.

Copyright

Copyright(C) Matthew Hardenburgh 2021. All Rights Reserved. [email protected]