Loading…
MatrixClock
TL;DR
MatrixClock is both a hardware and software project to create an extensible 40x8 dot matrix display with some sensors attached because, uhm. I could?
Here you will find the both the schematics, pcb layout and source code of my MatrixClock project.
Features
- Based on generaly available red 8x8 dot matrix displays with MAX7219. E.g. on eBay (the red one, with the yellow headers).
- Full source code (arduino, platformio)
- Full schematics, PCB layout and gerbers (kicad)
- ESP-12E/F module for driving display and ntp time keeping.
- USB powered
- User defined button
- Light sensor: APDS9301 and/or BH1750FVI
- Environment sensor: BME280 or BME680
- Extensible, units can be cascaded (only one should have active components though)
Libraries
- Adafruit's BME680 library has the nasty habbit of initializing the Wire library instead of leaving that to the calling program. This means they override our carefully set non-standard I2C pins. Needs to be commented out around line 104 in Adafruit_BME680.cpp.
- Same library, Adafruit_BME680.h, you want to comment out the include of Adafruit_sensor.h. Not there, not used, not needed.
Installation
The source is written on a Linux box and compiled/uploaded via the excellent PlatformIO toolkit. The schematics and pcb layout is created in KiCad.
I will not bother to tell you how to compile/upload the code, modify the schema, change the layout, create gerbers and wait patiently for the PCBs to arrive before starting your SMD soldering adventure. Simply because you should not do this if you not exhaustively researched all of the just mentioned area's.
Good luck! Pauline
Ask about this board
No comments yet. Be the first to ask about this board.